RulesEach participant must be aware of all rules and policies for ARL events.1. Rider’s meeting is mandatory, no exceptions.2. All motorcycles MUST pass technical inspection prior to entering the track surface.3. Failure pass tech inspection will prohibit you from entering the track.4. All motorcycles MUST display the tech sticker on the front of the motorcycle.5. Tires and brakes must be in good condition.6. All glass, headlights, taillights, turn signals, and plastic lenses must be taped over or removed. The head and tail lights must not visibly shine through the tape. It is recommended that head and tail light fuses be removed.7. Side mirrors must be removed. Taping over of mirrors is not permitted8. We recommend, but do not require, removal of centre or side stands. Bikes with side stands should have strong springs to insure that the kickstand cannot come down accidentally.9. All machines must have an operational handlebar mounted kill switch/button and self-closing throttle in good working condition.10. All motorcycles MUST use water instead of antifreeze type coolant (Water Wetter & Distilled water is recommended). This is non-negotiable and includes the liquid contained in the reservoir.11. Sprockets must be in good condition and chain wear must not be notable.12. It is recommended that oil drain plugs and brake caliper mounting bolts are drilled and lock wired.13. All Riders must wear appropriate riding gear. Full one piece or two-piece (zip completely around) motorcycle leather suits or Kevlar only construction suits allowed.14. All riders must wear full-face helmets that are designed for motorcycle use. Snell2000 or newer helmet, in good condition and proper fit for the rider, is mandatory.15. All riders must wear Leather gloves that are in good condition and cover the wrist. (Short gloves are not permitted.16. All riders must wear boots that extend above the ankle.